Trinnov | Altitude |IP|1.19

Introduction

This driver provides two-way control of a Trinnov Altitude Pre-Amplifier via RS232 or TCP, supporting both the 16-channel and 32-channel variants.

Version History

Version 1.19 – 11/06/2026~

• Fixed spelling mistake user guide.

Version 1.18 – 02/06/2026~

• Added Some additional Tags.

Version 1.17 – 30/3/2026~

• Added CI model

• Added Apex design

• Improved Tagging.

Version 1.16 – Unreleased~

• Added basic tagging.

Version 1.15 – 10/11/2022~

• Fix extracting subnet for WOL.

Version 1.14 – 30/03/2022

• Setting OP Mode.

Version 1.13 – 16/03/2022

• Stop scheduled reboot powering unit on if it is already Off.

Version 1.12 – 31/08/2021

• Added better Debug for wakeOnLan.

Version 1.11 – 31/08/2021

• Added wakeOnLan Multicast to driver.

Version 1.10 – Unreleased

• Added 'Upmix On Native' upmixer mode

• Fixed - MAC address used for WakeOnLAN functionality no longer requires a colon to be used as a separator

Version 1.9 – 20/04/2021

• Added toggle commands for mute, power, display and stealth

• Updated user guide

• Added slider controls to the demo project

• Fixed volume feedback correctly processed from Trinnov unit.

Version 1.8 – 19/11/2020

• Resolved issue where unit would immediately switch back on when switched off (fault triggered by sending power on when unit was already on)

Version 1.7 – 18/12/2019

• Added option to disable auto reboot.

Version 1.6 – 15/04/2019

• Added Set Volume DB command

• Fixed Set Volume command

Version 1.5 – 15/04/2019

• Wake on LAN if RTI is powered down

Version 1.4 – 13/03/2019

• Fixed to display changing its brightness when polling

Version 1.3 – 13/03/2019

• Added Display Mode Feature

Version 1.0 – 27/04/2018

• Initial driver release

Driver Installation

Open your RTI Integration Designer system file (or use the demo programming file entitled ‘TrinnovaltitudeDemo.rti’). Select your XP series processor from the

Open your RTI Integration Designer system file (or use the demo programming file entitled ‘TrinnovaltitudeDemo.rti’). Select your XP series processor from the System Workplace window and choose the Drivers tab.

Driver Configuration

The driver features several configuration properties that must first be completed.

Model — Choose whether you are controlling the 16-channel or 32-channel model.

Connection Settings:

• Connection Type: Define whether your Altitude unit is controlled via TCP or RS232.

• IP Address: (TCP Only) Set the IP address of your Altitude unit.

• Port: (TCP Only) Set the network port of your Altitude unit.

• Serial Port: (RS232 Only) Set the serial port for your Altitude unit.

• Device Address: Sets the device address – must match that set in the web-based interface.

Wake on LAN (TCP Only) — Set the MAC Address of your Altitude unit to enable WoL.

Reboot Time — Optionally configure an automatic daily reboot time (not available for Serial Altitude32). Set Enable Define and Reboot Time accordingly.

Max Volume — Set a volume limit in dB to protect speakers. Percentage feedback is scaled to this maximum so 100% always equals your defined limit.

Driver Commands

• Input Select: Source.

• Preset Select: Select Preset – Presets are setup on Trinnov Altitude, range 0–29.

• Set Volume By Percentage: Changes Volume between 0%–100%.

• Set Volume dB: Changes Volume between −99dB–Max Volume (set in properties).

• Step Volume: Changes Volume by Stepping up and down.

• Ramp Volume: Changes Volume (percentage) from 0–100 with Ramp feature (ms).

• Mute: Changes Mute settings.

• On: Turn On Trinnov (excluding Serial Altitude32).

• Off: Turn Off Trinnov (excluding Serial Altitude32).

• Toggle: Toggle the power.

• Display Mode: Changes display screen.

• Stealth Mode: Changes mutes and display screen.

Driver Feedback

• Display Mode: Current State of stealth mode.

• Mute: Current State of mute.

• Volume By Percentage: Current Volume percentage.

• Volume dB: Current Volume in dB.

• Current Source Selected: Name of current source.

• Source list: Boolean value show current source.

• Source list Names: List of sources name received from the Trinnov Altitude.

• Current Preset Selected: Name of current preset.

• Preset list: Boolean value show current preset.

• Preset list Names: List of preset names received from the Trinnov Altitude.

• Current upmixer Selected: Name of current upmixer mode.

• Upmixer list: Boolean value show current upmixer.

• Current remapping mode Selected: Name of current remapping mode.

• Remapping mode list: Boolean value show current remapping mode.

Trinnov Settings Selected

• Quick Optimized Selected: Boolean value show current state.

• Use Acoustics Correction Selected: Boolean value show current state.

• Use Level Alignment Selected: Boolean value show current state.

• Use Time Alignment Selected: Boolean value show current state.

• ByPass Selected: Boolean value show current state.

• Dim Selected: Boolean value show current state.

• AudioSync Selected: Boolean value show current state.

• Sample Rate Selected: Text Value.

Non Standard RTI Tags

Display Mode Off (F)

• Function usage: Sets the Display Mode to off

Display Mode On (F)

• Function usage: Sets the Display Mode to on

Display Mode Toggle (F/V)

• Function usage: Toggle Display Mode Between off and on

• Variable usage: Boolean Feedback for when Display Mode is on or off

Stealth Mode Off (F)

• Function usage: Sets Stealth Mode Off

Stealth Mode On (F)

• Function usage: Sets Stealth Mode On

Stealth Mode Toggle (F/V)

• Function usage: Toggles Stealth Mode on or off

• Variable usage: Boolean Feedback for when stealth mode is on or off

Input X (F/V)

• Function usage: Selects Input X as the current input

• Variable usage: Boolean Feedback reports true if Input X is selected

Remapping X (F/V)

• Function usage: Selects Remapping Mode X

• Variable usage: Reports true if Mode is X is current remapping mode

Upmixer X (F?V)

• Function usage: Selects Upmixer Mode X

• Variable usage: Reports true if Mode is X is current Upmixer Mode