- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
Description:
Driver to control SunBrite Veranda 3 series TV's
v1.1 Fixed ‘Channels, HDMI (X), and AV’ input commands, improved documentation, improved UX
Sunbrite TV
Tested and developed on a Veranda 3rd generation TV.
Revision History
The Initial release of the driver
1.1 Fixed ‘Channels, HDMI (X), and AV’ input commands, improved documentation, improved UX
TCP Connection – Driver Properties
It is recommended the TV be set with a static IP when using this driver. The default port used by the TV is 60028.
The WakeOnLAN Port Number MUST be set. Typically, it should be set to either 7 (United States), 9 (Europe), or 11. If you do not set this the ‘Power On’ command will not work.
The TV MAC Address MUST be set for the ‘Power On’ command to work.
The Network Mask is by default should be set to ‘255.255.255.0’. This may need to be adjusted depending on network configuration.
TV Setup
You must enable the Control API port setting in the TV for this driver to function.
System Variables
The TV only supports the tracking of the following system variables: volume, mute, and power. All other commands are single direction (they will not provide the driver feedback).
Set Channel / Set Volume
Both the channel and volume can be set to a discrete value.