- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
Description:
Driver provides IP control of the Somfy MyLink style shades
Please Note: This driver works with the US version only. There is not currently an protocol for non-US versions. Somfy says DO NOT try to flash US firmware into non-US devices as this will brick them.
Somfy MyLink
This driver was designed and tested with a Somfy MyLink Shade and Controller. Setup requires use of the Somfy MyLink app.
Revision History
1.0 The original release of the driver.
IP Connection
The driver supports IP control, using TCP connection on port 44100
Configuration
• Follow all installation steps provided by Somfy. Once completed go to the menu (top left corner of app) under myLink Settings, click the Integration option
• Click on "Get Integration Report"
• Enter the listed "System ID" into the appropiate field in Integration Designer
• The "Target ID" is listed as the category header, as well as the preface for each shade's "Target" for example:
CC1005E3 RTI MyLink
Target CC1005E3.1
Name: Cellular Shade
The Target ID "CC1005E3" should be entered into the appropriate field in Integration Designer
Shades
Shade Count: Enter the total number of shades in the system
Shade Name: Enter the name of the shade. Shade names and numbers can be found in the integration section of the Somfy app, at the end of each shades target. In the above configuration example the shade named Cellular Shade is number 1.
Scenes
Scene Count: Enter the total number of scenes in the system
Scene Name: Enter the name of each scene. Scenes can be found in the Somfy app menu under Control > Scenes. Order doesnt not matter, nor does spacing or capitalization. Incorrect total count or mispelled names will result in failure to send some/all scenes correctly.