- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
Description:
Serial and IP control driver for Rotel RSP-1582 Sound processor.
Version History:
Version 1.0 Initial Release
Rotel RSP 1582 Sound Processor
This driver was designed and tested with a Rotel RSP-1582 with the following software:
Main Software: V2.82
DSP Software: V1.3
Standby Software: V2.82
Revision History
1.0 The Initial release of the driver
RS-232 Connection
The Serial (RS-232) connection on the Rotel Sound Processor should be connected with a straight through cable to the XP Processor serial adapter.
The baud rate of the Serial (RS-232) port is 115200.
IP Connection
The RSP-1582 uses TCP port 9596. You should also enable "Network Wakeup" found in the System Setup Menu.
Driver Notes
- If the driver is launched for the first time when the device is in standby, it will not initialize until first power up.
-RSP1582 Main Software V5.xx uses full step volume in the range of 0-96, older versions use the -90.0 to 0.0 half steps. The driver only supports the newer version.
-Raw commands are terminated with the "!" symbol