- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
Description:
Serial and IP driver for Rotel RAP-1580 Surround Amplified Processor.
Version History:
Version 1.0 Initial Release
Rotel RAP 1580 Surround Amplified Processor
This driver was designed and tested with a Rotel RAP-1580 with the following software:
Main Software: V1.45
DSP Software: V1.9.56
Standby Software: V1.45
Revision History
1.0 The Initial release of the driver
RS-232 Connection
The Serial (RS-232) connection on the Rotel Surround Processor should be connected with a straight through cable to the XP Processor serial adapter.
The baud rate of the Serial (RS-232) port is 115200.
IP Connection
The RAP-1580 uses TCP port 9596. You should also enable "Network Wakeup" found in the System Setup Menu.
Driver Notes
- If the driver is launched for the first time when the device is in standby, it will not initialize until first power up.
-Raw commands are terminated with the "!" symbol