Driver Details

Rako Wireless

By: RTI
Updated: Oct. 28, 2011
Version: 1.0

Description:

This driver is for the Rako wireless central lighting control system via RS232 or Ethernet.

Rako Lighting

This driver is for the Rako wireless central lighting control system using either a RAV232+ or APR-Bridge interface.

Release History

1.0 The original release of the driver

Config Settings

TCP Connection

The Ethernet connection on the APR-Bridge interface should be connected to the Network.

RS-232 Serial Port Settings

The RS-232 connection on the RAV232+ interface should be connected directly to the XP series processor serial adapter; a null modem is not required.

Driver Notes

- Name variables (Room, Channel, and Scene) are only available when using the APR-Bridge and TCP.

- Scene Status variables (1-4 and Off) are provided for channel 0 of a room, and are tracked by the last scene selected in the room.

- Channel Direct Level Driver Commands for 10-100% and Off are provided.

- Channel Adjust Level Driver Commands (Up/Down) are provided and issue a stop when the button is released.

- Scene Recall Driver Commands (1-4 and Off) are provided for channel 0 of a room.

- Store to Current Scene Driver Command is provided for storing the current channel level to the current scene selected in a room.

- Scene Status Variable updating may take up to 5 seconds when scenes are changed outside of the driver.