- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
Description:
This driver supports pool and spa control for Pentair IntelliTouch systems utilizing the i-Link Protocol Interface Adapter.
Version History:
Version 1.01: fixes a problem that sometimes prevented the driver from connecting to the Pentair system.
Version 1.02: fixes the Solar Heater Option and improves overall feedback.
Version 1.1: expands on Auxiliary count, adds events for Pool, Spa, Solar, and Auxiliary, and also adds a sample file.
Version 1.11: fixes driver version and info file version mismatch.
Pentair Pool Products IntelliTouch Pool/Spa Control System
Provides RS-232 control and feedback utilizing the IntelliTouch i-Link Protocol Interface Adapter. A null modem is not required.
Revision History
1.0 The Initial release of the driver
1.1 Added Auxiliary control and feedback for Aux 11-50.
Added Auxiliary On and Off Events.
Added Pool, Spa, and Solar Events.
Added Sample File.
1.11 Fixed info file and driver revision mismatch.
General Settings
Serial Port: Choose the serial port that the i-Link Adapter is connected to. The baud rate for the i-Link is 9600.
Variables
Air Temp
Pool Setpoint
Pool Temp
Spa Setpoint
Spa Temp
Pool Heat (On/Off)
Pool Pump (On/Off)
Spa Heat (On/Off)
Spa Mode (On/Off)
Aux1 – Aux8 (On/Off)
Aux3 – Aux7 Dimmer Level
Solar Heat (On/Off)
Driver Commands
Aux On/Off/Toggle
Pool Pump On/Off/Toggle
Pool Heater On/Off/Toggle
Pool Setpoint Up/Down
Spa On/Off/Toggle
Spa Heater On/Off/Toggle
Spa Setpoint Up/Down
Aux Dim Up/Down
Solar Heater On/Off/Toggle
Notes
i-Link adapter firmware version 1.030
Check the solar heater option box if a solar temp sensor is installed (polls for Solar Heat status on startup).
Pool Temperature is only available when the pool pump is on.
Spa Temperature is only available when the spa mode is on.
Aux outputs that have been assigned to dimmers can be controlled. Level can only be changed when the output is on. Level adjustment is in 10% steps.