- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
Description:
This driver is for controlling Netgear M4250 Series Network Switches.
The M4250 Series is known for its versatility, offering a range of models with varying port densities and power-over-Ethernet (PoE) capabilities. These switches are ideal for small to medium-sized businesses that require reliable and efficient network connectivity. With features like Layer 2+ and Layer 3 Lite functionalities, the M4250 Series ensures seamless communication and efficient traffic management. Pairs perfectly with RTI Video Over IP products as well.
-
Ability to Enable/Disable any port.
-
Ability to Enable/Disable PoE on any PoE port.
-
Power Cycle of Switch.
-
Feedback for Port State, PoE State, Power Consumption etc.
-
Masks Password in Driver Configuration
Version History:
Version 1.0 - Initial Release
Version 1.01 - Fixes the issue when switches don’t have any fans, it stops the driver initializing.
Version 1.02 - Fixes an issue with reconnecting after the switch has been rebooted.
Netgear M4250 ProAV Switches
NETGEAR | M4250 PRO AV SWITCHES | IP | V1.01
Introduction & Manufacturer Profile
Netgear have produced an entirely new series of switches developed and engineered for the growing audio, video over IP (AV over IP) market. These AV Line switches combine years of networking expertise with best practices from leading experts in the professional AV market
Version History
Version 1.0: Initial Release
Version 1.01: Fixes the issue when switches don’t have any fans, it stops the driver initializing.
Version 1.02: Fixes an issue with reconnecting after the switch has been rebooted.
Driver Features
Ability to Enable/Disable any port. Ability to Enable/Disable PoE on any PoE port. Power Cycle of Switch. Feedback for Port State, PoE State, Power Consumption etc. Masks Password in Driver Configuration
System Requirements & Prerequisites
RTI System Requirements
Integration Designer: 11.4 or later
XP FW: 23.5.11 or later
Driver Configuration
Add the driver to Global.
Once added you will need to configure the driver configuration
Switch Name - Give the switch an appropriate name
IPAddress - Enter the switches IP Address here
User Name - Enter the User Name to be used here. (We recommend setting up a user just for the driver in the Switches Settings)
To Add a User, Log in to the switches Main UI, go to the Security page, and create a user with Read and Write Access then select the SHA512 Encryption and click add and save.
Password - Enter the Password for the User here
Select Switch Model - Select the model of the switch you are using here. Its important you select the correct switch model or the port configuration will be wrong.
Template Page Names:
Netgear Switch
System Testing
Integration Designer: ID11.5
XP Processor Model: XP-8v
XP Processor Firmware: 23.5.11
Device Model(s): M4250-10G2F-PoE+
Device FW: 13.0.4.14
Support Contact
RTI Control - 1.952.253.3137 support@rticontrol.com