Power Tracker Interface

(c) 2012 My Device.

www.mydevice.com.au

This driver provides 2-way feedback and control of the Power Tracker system.

Note:

Please report any bugs found to bugs@mydevice.com.au. Include driver version number and steps to reproduce the issue where possible.

Driver Configuration Settings:

System Settings:

TCP Address - The IP address of the Power Tracker SG6200NXL.

Poll Frequency - The period of time between requests to get power information. Note that this value is multiplied by the number of modules you have connected. For example, if this frequency is set to 10 seconds and you have 3 modules, each module will be updated every 30 seconds.

Compact Zigbee Power Meters:

Module 1-10 - Paste the EUI64 identifier of each module you wish to query. Leaving a module empty indicates this is the end of the list.

EUI64 values can be found in 2 places:

1) On the box the module came in. There is a serial number sticker, the very bottom value labelled "MAC" is the EUI64.

2) Log into the Billion Power Tracker web admin page (as an administrator) and click on the "Advanced" menu, then select "Power Management" and "ZigBee Config". Here you should see a Meter List showing the EUI64 value for each module.

Make sure you enter the EUI64 strings as uppercase, without any trailing spaces or other characters.

Events:

Events are available for Zigbee relay modules changing state. Please note that the driver has to poll each device to determine if it has changed state, so this event won't be instantaneous.