Manufacturer:MotionBlinds
Control Platform:RTI
Integration Designer Version:11.8
XP Firmware Required:24.3.29
Driver Developer:Intrinsic Dev, Part of Intrinsic Group Limited
Document Revision Date:28th May 2024

Models:

MotionBlinds hub. Shades – Roller, Venetian, Roman, Honeycomb, Shangri-La, Roller Shutter, Awning, Day & Night, Dimming, Curtain ( + Left/Right)

> Overview

This driver allows a RTI system to communicate with up to 32 MotionBlinds devices via the MotionBlinds Hub for full control and feedback.

INTRINSIC MULTICAST DRIVER REQUIRED

Please add the separate comms driver, ‘Intrinsic Multicast Driver’ to the project along with this MontionBlinds Driver and follow the configuration process steps below. Further info can be found in the Intrinsic Multicast Driver documentation. Group Address and Port MUST be set to:

Group Address – 238.0.0.18

Port – 32101

> Supported features

Commands –

Button TagCommand Name

Shade UpOpen

Shade DownClose
Shade StopStop
Shade LevelPosition Slider
QuarterPosition - Quarter
HalfPosition – Half
Three QuartersPosition – Three Quarters
TiltSliderTilt Slider
TiltOpenTilt Open
TiltCloseTilt Close
TiltHalfTilt Half

FavouriteFavourite

TDBU UpBoth Up

TDBU DownBoth Down
TDBU TOP UpTop Up
TDBU TOP DownTop Down
TDBU BOT UpBot Up
TDBU BOT DownBot Down
TDBU StopStop
TDBU TOP LevelTOP Position Slider
TDBU BOT LevelBOT Position Slider
TDBU TOP QuarterTOP Position – Quarter
TDBU TOP HalfTOP Position – Half
TDBU TOP Three QuartersTOP Position – Three Quarters
TDBU BOT QuarterBOTTOM Position – Quarter
TDBU BOT HalfBOTTOM Position – Half
TDBU BOT Three QuartersBOTTOM Position – Three Quarters
TDBU Favourite OpenFavourite Open

TDBU Favourite CloseFavourite Close

RefreshRefresh

Variables –

Button TagVariable NameType

Name [1-16]NameString

Type [1-16]TypeString
Level [1-16]PositionInteger
Tilt [1-16]Tilt PositionInteger
Battery [1-16]Battery LevelInteger
Signal [1-16]Signal StrengthInteger
Open [1-16]OpenBoolean
Closed [1-16]ClosedBoolean
isMoving [1-16]Is MovingBoolean
FullTilt [1-16]fullTiltAvailableBoolean

PartialTilt [1-16]partialTiltAvailableBoolean

TDBU Name [1-16]NameString

TDBU Type [1-16]TypeString
TDBU Top Level [1-16]Top PositionInteger
TDBU Top Open [1-16]Top OpenBoolean
TDBU Top Closed [1-16]Top ClosedBoolean
TDBU Bottom Level [1-16]Bottom PositionInteger
TDBU Bottom Open [1-16]Bottom OpenBoolean
TDBU Bottom Closed [1-16]Bottom ClosedBoolean
TDBU Top Battery [1-16]Top Battery LevelInteger

TDBU Bottom Battery [1-16]Bottom Battery LevelInteger
TDBU Signal [1-16]Signal StrengthInteger

TDBU isMoving [1-16]Is MovingBoolean

Placeholder sample text has been provided for String and Integer variables to help with panel design layout.

Events –

CategoryEventTriggered When Current..

Blind OpenBlind [1-16] Open..Position = 0

Blind ClosedBlind [1-16] Closed..Position = 100
TDBU Blind OpenTDBU Blind [1-16] Open..Position of top or bottom = 0
TDBU Blind ClosedTDBU Blind [1-16] Closed..Position of top or bottom = 100
Battery LowBlind [1-16] Low..Battery level < 100

TDBU Battery LowTDBU Blind [1-16] Low..Battery level of top or bottom < 100

Command, Variable and Event instances become available throughout the Integration Designer project in accordance with the values selected in the ‘Number of Devices’ integer dropdowns in Driver Properties. Additionally, device number for ‘Blinds’ and ‘Top Down Bottom Up’ can be set to 0 hiding the unused commands, variables, and events from the project.

Any feature not specifically noted as supported should be assumed to be unsupported.

> Driver support

This driver is fully supported via our online ticketing system. If you require assistance with this driver please submit a support request at www.intrinsicdev.com/support.

> Continued dealer support

Intrinsic Dev offer free licence keys for showrooms and dealers’ own homes. To obtain your free licence keys simply drop us a support ticket. All our drivers/modules are fully supported by our online ticketing system.

> Disclaimer

Intrinsic Dev’s drivers are created to the highest standard developed with industry leading practices.

By installing this driver, you agree to our full Terms and Conditions, a copy of which can be found at the end of this document.

> Driver licence

This driver requires a licence to function. Pricing and licences can be obtained by visiting https://www.intrinsicdev.com/. Licences are issued on a per controller basis. You only need a single licence for multiple installations on the same controller.

This driver is powered by the Intrinsic(Athena) cloud and will auto detect if you have purchased a license for your systems MAC address.

If you have not already purchased a license it will show an error. Please navigate to www.intrinsicdev.com to rectify and within a few minutes of order completion the driver will update and activate. You do not need to enter any information manually or make changes to the driver.

> Driver configuration

Ensure you have downloaded the latest version of the driver from: https://www.intrinsicdev.com/

> Device setup

Before attempting integration onto a RTI system, fully configure your MotionBlinds product using the MotionBlinds app. Ensure that you have verified the functionality before proceeding.

Please add the separate comms driver, ‘Intrinsic Multicast Driver’ to the project along with this MontionBlinds Driver and follow the configuration process steps below. Further info can be found in the Intrinsic Multicast Driver documentation. Group Address and Port MUST be set to:

Group Address – 238.0.0.18

Port – 32101

> Configuration Process

1. Download the latest version of the driver from www.intrinsicdev.com

2. Place the .rtidriver file in your designated custom driver directory. This can be identified in Apex by clicking Options > Set Directories.

3. Import the driver into your project.

4. In Intrinsic Multicast Driver - Driver Properties:

a) Multicast Settings - Set Group Address to 238.0.0.18

Set Port to 32101

b) Communication Style – Use tick box to set ‘Global Data Line Enabled’ to ENABLED.

c) Number of Connections – NOT REQUIRED - Leave as 0 unless setting is required for another driver in the project.

d) Number of Addresses to Ignore – NOT REQUIRED - Leave as 0 unless an address on network needs to be ignored / blocked from interfering with this driver or others in the system.

5. In MotionBlinds - Driver Properties:

a) Multicast Mapping – Link Global Data RX to Intrinsic Multicast Driver. Select Input field (“Not Set”), Intrinsic Multicast Driver -> Multicast Data -> Global Data RX.

b) Only if required - Enable Map Ignored Addresses and complete mapping process to pull in addresses set in Intrinsic Multicast Driver that are to be ignored by this driver – see Intrinsic Multicast Driver documentation for more information.

c) Connection – Enter IP Address of Hub.

d) Set a port number for Registration Port and Management Port.

6. Send the configuration to the processor.

7. Using a mobile device, open the MotionBlinds app tap the 3 dots in the top right and go to Settings -> About Motion. Tap the center of the screen 5 times, a pop-up will appear with your key. Tap copy.

8. After copying the Key, open a web browser on your mobile device and enter the IP Address of your RTI processor followed by a colon and the Registration Port number, e.g. 192.168.10.101:9031 and paste the Key into the input field and tap Submit. Check that the Key now appears under ‘Current Key: ‘. Mobile device must be on same network as the processor.

9. Return to your computer, open a web browser and enter the IP address of your RTI processor followed by a colon and the Management Port number, e.g. 192.168.10.101:9070. Here you will see MACs of your devices, separated into Normal Devices and Top Down Bottom Up tables.

Driver Properties – Number of Devices:

Using the driver web management page as a guide, use the dropdowns to select how many devices there are for each device type. Device input fields will populate below.

Number of Devices can be set to 0 to hide from project completely if not in use

Copy and paste the MACs:

Normal MACs – Device (1-16) Mac.

Top Down Bottom Up – TDBU Device (1-16) Mac.

Add a label of your choice, this will be displayed via the Name text variable.

Label does not need to match Device Type displayed in Management Port tables.

10. You can now move onto setting up your UI. The ‘Shades’ template is a recommended starting point, it will automatically be added. Or use the

MotionBlinds-Example.apex file which contains a fully configured UI (Virtual Panel and Ipad) for 1 Normal Device and TDBU Device.

Debug – Enter processor IP Address into browser. Click SYSTEM LOG then under Log Levels set MotionBlinds to Messages for highest level of tracing from the driver.

> Integration Designer11

There are multiple ways to map the features from this driver to a Controller, we recommend using the Tag Browser technique.

> Tag Browser

Tag Browser shows all tags - commands and variables provided by the driver. Using the Filter, the tags from this driver can be shown and organised alphabetically by selecting Show MotionBlinds Driver Tags and then dragged to a button, automatically assigning the function or text variable.

For multiple devices use the integer selection field to the right of the command selection in Tag Editor after assigning the buttontag. Increase this digit value from 0 to 1-16 to match the Device / TDBU Device number you wish to operate as defined in Driver Properties.

Max Devices / TDBU Devices is 16 each - do not set this number below 1 or above 16.

> Tag Field

Another technique is to use the Tag input field. Create and select a button, enter the custom Tag into the Tag input field located at the bottom of the Integration Designer window and the command will be mapped. Tags listed at top of this document.

Text Variables can NOT be mapped this way.

See section > Manual Text Variable Mapping

> Macro List

Another technique is to add a macro via the Macro List, drag Command across from Macro Steps to the Tag Editor area, click <select a device> and select MotionBlinds, you can now select the functions provided via the driver.

e.g.

“Command – MotionBlinds – Device Control \ Open – 1”.

Finally, enter the name of the Macro you created into the Tag input field to map a command to a selected button.

> Manual Text Variable Mapping

To dynamically display the Label name of the Device / TDBU Device set in Driver Properties, create a text area and then right click – Edit Text… to open the Edit Button Text window. Text variables can be found via the Insert Control Variable button - MotionBlinds. Here you will see the list of Devices and TDBU Devices 1-16 with their assigned names. Select the one you wish to display. Placeholder sample text has been assigned to text variables to help with UI design layout.

(Displaying the name via it’s text variable is optional, you could simply enter text of your choice via the Edit Button Text window if preferred).

The Visible State Variables can be viewed here but these should not be used as text variables as will only display “true” / “false”. See section ‘Visible State Variables’ for instructions on how to utilise.

Fully Closed = 100

Fully Open = 0

Tilt = 0°-180°

> Visible State Variables:

Open

Closed

Is Moving

fullTiltAvailable

partialTiltAvailable

Top Open

Top Closed

Bottom Open

Bottom Closed

Is Moving (TDBU)

To achieve the dynamic UI design of displaying a green circle (or highlight of your choice) around the ‘open’ or ‘close’ buttons/icons that are currently true or for a text box / icon to appear depending on state, the variables listed above are provided (for each of the 32 devices) to apply to the Visible parameter of the highlight element.

Using Arrange (Send to front / back) to help with positioning the elements, place the visual highlight behind / on top of the icon/button and assign a Visible variable from the list matching the selected button with the correct Device / TDBU Device number. In the attached MotionBlinds-Example.apex file there are text boxes with text “Open” and “Closed” / “Up” and “Down” that uses these variables to dynamically appear on the button depending on current state.

These could also be used on the visible state of the command buttons themselves to stack the Open / Close buttons on top of each other. As the state changes from true to false the corresponding button will display and the other will disappear, freeing up UI space.

‘Tilt Available’ Variables

On Tilt enabled devices, blind level below 95 only allows tilting of 50° – 130°. Above 95 allows for full 0° - 180° tilt functionality. The fullTiltAvailable and partialTiltAvailable variables can be used to remind the user of this and when full tilt functionality is available. The command will still be sent to the device regardless.

> Blind Position Slider

Add the slider to the UI. Corners can be dragged to change it from horizontal to vertical.

In Button Properties assign the Position variable to Value for the corresponding Device number.

If you wish to display vertical sliders to represent the top to down nature of a blind, swap the Minimum and Maximum values around in the Graph Scale section.

Min – 100 / Max – 0.

For the Tilt Slider (vertical) Min – 180 / Max – 0.

Assign the Command. After clicking the 3 dots the Driver Command window appears.

Click the button to the right of ‘Not Set’ – MotionBlinds > Device (or TDBU) Control > Position Slider (or any with Slider in the name.

Under Parameters enter the Device Number (1-16).

Make sure Dynamic is set to Value (topValue / bottomValue for TDBU)

Use the checkbox to select Sustain – recommended level Minimum 1000ms.

Note – You do not need to assign the Command as a Macro command in Button Properties on the slider element.

> Blind Position Favourite

Normal Device

After adding a button to the panel, assign “Command – MotionBlinds – Device Control \ Favourite – [Device Number(1-16)] – [Favourite Position (0-100)] ”.

Upon clicking the ‘+’ icon to the right of command you will see labels for the integer inputs. The desired Favourite Position to be entered into value.

TDBU Device

As top and bottom limits can’t be set via the MotionBlinds app for TDBU devices 2 commands (Favourite Open & Favourite Close) are available, which could be used to achieve this functionality.

“Command – MotionBlinds – TDBU Control \ Favourite [Open or Close] – [Device Number(1-16)] – [Favourite Position TOP (0-100)] – [Favourite Position BOTTOM (0-100)] ”.

Upon clicking the ‘+’ icon to the right of command you will see labels for the integer inputs. The desired Favourite Position TOP to be entered into topValue, Favourite Position BOTTOM to be entered into bottomValue.

> Troubleshooting

The Token pasted into Registration Port is persistent across processor run-times. Repeat steps 7-10 if changing to a different MotionBlinds account and entering a new key. Re-send configuration to the processor.

Check current Key is correct. Re-copy and paste to make sure.

Check MACs entered in Driver Properties match MACs displayed in Management Port.

If unable to access Registration Port ensure mobile device is on the same network as the processor.

Registration Port can also be accessed on a desktop web browser via same process. Key could be emailed to yourself from mobile device and then pasted into input filed in browser.

> Terms and Conditions

This page gives you all the information you need to know about Intrinsic Dev and the legal Terms and Conditions through which we sell the software listed on our website to you. These Terms apply to any contract of sale for products that exists between us and you.

Please read these Terms and Conditions carefully, if you do not agree with something written within them do not use our website or install our software. Before completing your purchase you will be asked to confirm you have read and understood these Terms, unfortunately if you refuse our Terms you will be unable to complete a transaction on our website.

We recommend you print a copy of our Terms and Conditions or save them to your computer so you can refer to them in the future as necessary.

We reserve the right to change these Terms and Conditions and recommend you read through them each time you use our site to ensure you understand how they apply to you.

These Terms, and any contract that exists between us, are in the English language only.

1. About Us

1.1 Intrinsic Dev is a trading name of Intrinsic Group Limited. Our registered office address is 9 Dicconson Terrace, Lytham, Lytham St Annes, FY8 5JY. Our trading address for all non-financial correspondence is The Maltings, Allendale, NE47 9EE.

1.2 Intrinsic Group Limited is registered in England and Wales under company number 09659256.

1.3 Contacting us:

1.3.1 To discuss a contract with us in accordance with your legal rights please simply contact us with your query. You can contact us by email at info@intrinsicdev.co.uk

1.3.2 To contact us for any other reason please submit a helpdesk ticket online as this is the quickest way to get in touch. Alternatively you can email info@intrinsicdev.co.uk but please note tech support cannot be contacted in any way other than the online helpdesk. You can also use the form on the Contact Us page.

1.3.3 If we need to contact you in regards to the contract that exists between us we will do so using the information you provided when placing the order, usually by phone or email.

1.4 Intrinsic Group Limited is a member of CEDIA. CEDIA is the international trade association and central touch point for over 3,700 member companies worldwide who design, manufacture, and install technology for the home.

2. Our Products

2.1 We make every effort to ensure we provide you with accurate information on our software. If you believe we have misrepresented the functionality of a driver or module please contact us as set out in section 1.3.

2.2 Images on our website are for illustrative purposes only. Our drivers are only available as instant downloads and not available in any hard format.

2.3 Our software is licensed to you, not sold to you. All of our software is available to download free of charge but will require licensing to function. All products that are offered for sale on this website are licenses for the automation controller specified at the time of purchase.

2.3.1 Obtaining a license key from Intrinsic Dev grants you a non-exclusive, non-transferable, limited and revocable license to install and use the specified software on a device owned or managed by you or your organization. The number of license installations may not exceed the total number of licenses you purchased for the software.

2.3.2 This license applies only to the applicable driver/module purchased and any updates that supplement the original driver/module.

2.3.3 Intrinsic Dev's software is licensed, not sold, to you and Intrinsic Dev retains ownership of all copies even after installation on your device.

2.3.4 This license is valid only for the specific system identified at the time the license was purchased and cannot be resold or transferred by you on to any other system. Under exceptional circumstances Intrinsic Group Ltd may grant authorization to transfer an existing license to a new system but maintains the right to charge an administrative fee for this service as well as the right to refuse authorization at Intrinsic Group Limited's sole discretion.

2.3.5 Intrinsic Group Limited may transfer its rights and obligations, or sub-contract or sub-license to another legal entity, provided your consumer rights are not prejudiced.

2.4 All software written by Intrinsic Dev remains the property of Intrinsic Group Limited. This software is the intellectual property of Intrinsic Group Limited, and is protected by law, including English and International copyright laws.

2.5 You may not decrypt, reverse engineer, modify, translate, disassemble or decompile any of Intrinsic Dev's drivers/modules in whole or in part. Any modifications will immediately terminate all licenses held and full compensation for any and all infringements will be sought.

2.6 Intrinsic Dev reserve the right to withdraw a module/driver from sale at any time and for any reason, including, for example, if the equipment for which the driver/module is written is discontinued or substantially modified.

2.7 Intrinsic Dev carry out extensive BETA testing on all our software. Software that remains in BETA will not be offered for sale on this website. Our BETA testing scheme is covered by separate Terms, but in signing up to this scheme you consent to also abide by these Terms and Conditions. All BETA software remains the property of Intrinsic Dev and is covered by confidentiality agreements. This software must not be abused in any way as per section 2.5 and all discussions and findings during the testing phase are to remain confidential. Intrinsic Group Limited reserve the right to revoke BETA testing privileges at any time.

3. Use of our website

3.1 Your use of our site is governed by these Terms and our Privacy Policy. Please ensure you read these documents fully so you are aware of all Terms that apply to you.

3.2 You must be over 18 to purchase from this website.

3.3 You are responsible for ensuring that your account details and passwords remain confidential when using our website and agree to accept responsibility for all activities that occur under your account and password.

3.4 Please ensure you provide us with details that are complete and correct when setting up your account or placing an order. We cannot be held responsible for any delays or losses suffered due to incorrect information being supplied.

3.5 We will endeavor to provide you with uninterrupted, error free access to our website, however due to the nature of the internet this cannot always be guaranteed. On rare occasions your access may be restricted or interrupted to allow updates, upgrades or repairs; we will endeavor to carry out such tasks in the shortest time possible.

4. Our Contract with you

4.1 All Intrinsic Dev drivers/modules are designed to be used by qualified system integrators for the relevant control platform. When obtaining a license to use our software (whether free or purchased) you are confirming your status as above. We regret we only sell B2B and cannot license our software to end consumers. If you are the owner of a system and you believe you require our software please contact your system integrator to obtain a license and carry out the applicable integration work on your behalf.

4.2 Our drivers/modules are all available for instant download free of charge, you do not need an account with Intrinsic Dev to download a driver. The majority of our drivers require license keys to activate, you do need an account to obtain a license key. To obtain a license key (whether for a free or chargeable driver) simply add the relevant driver(s) to your basket and follow the checkout procedure online. Please check you have provided us with all the correct information before completing the transaction. Please note we do not accept purchases or provide license keys by phone or email.

4.3 When you place an order to purchase a license key from Intrinsic Dev you will be sent a confirmation email to confirm we have received your order. Please check through this email and notify us if anything is incorrect.

4.4 A contract between you and Intrinsic Dev exists only once you have received your license key, usually contained within the confirmation email.

4.5 Intrinsic Group Limited will deem this contract null and void in the event a license is used in any way that can be deemed harmful, including, but not limited to attempts to decrypt, reverse engineer, modify, translate, disassemble or decompile a driver/module, or the use of a license on a system not specified for at the time of purchase.

5. Payment

5.1 We accept all major credit or debit cards excluding American Express. Payment is taken immediately by our online payment provider Stripe. Stripe offers a secure payment gateway for online credit and debit card processing. All card numbers processed by Stripe are encrypted on disk with AES-256. Decryption keys are stored on separate machines. Stripe's infrastructure for storing, decrypting, and transmitting card numbers runs in separate hosting infrastructure, and doesn't share any credentials with Stripe's primary services.

5.2 Do not email your card details. We accept no responsibility if you provide us with your details in this way.

5.3 Card fraud is illegal and will always lead to prosecution. Every transaction taken is subject to fraud checks performed by Stripe; if we believe the risk of fraud is present on a transaction we reserve the right to cancel the order with immediate effect and without correspondence.

5.5 The Intrinsic Dev website is fully PCI Compliant. Stripe has been audited by a PCI-certified auditor and is certified to PCI Service Provider Level 1. This is the most stringent level of certification available in the payments industry. To accomplish this, Stripe make use of best-in-class security tools and practices to maintain a high level of security.

6. Delivery

6.1 There are no delivery charges for any of the products listed for sale on this website. All software is available to download instantly, free of charge. All license keys are automatically emailed upon receipt of applicable payment.

6.2 Our drivers/modules are not available in any hard format

6.3 License keys are emailed to the address given during the checkout process. Please check you spam folder if you have not received your license and allow up to 12 hours before contacting us regarding a missing license key.

6.4 We recommend reading the integration notes for each driver before attempting installation.

7. Refunds and Warranty

7.1 We do not offer refunds on our licensing. If you have made a mistake during your purchase or have another legitimate reason for requiring a refund please contact us as set out above in 1.3. Refunds may be offered within 7 working days in some circumstances, but please note no refunds will be considered if the driver/module has already been installed onto the relevant control platform.

7.2 Whilst every care is taken to ensure the thorough testing of our drivers, you should always carry out your own tests before first use. You agree not to hold Intrinsic Group Limited or any related party, liable for any issues or loss arising from the installation of our drivers/modules.

7.3 Our software is provided "as is" and "as available", without express or implied warranty or condition of any kind to the maximum extent permitted by law. We disclaim any warranty that our drivers/modules will meet your requirements or will be constantly available, uninterrupted, timely, secure, or error-free; the results obtained from the use of our drivers/modules will be effective, accurate, or reliable; the quality of the software will meet your expectations; or any errors or defects in the software will be corrected.

7.4 Intrinsic Group Limited specifically disclaim all liability for any actions resulting from your use of our software. You use our software at your own discretion and risk, and you are solely responsible for any damage to computer systems/control platforms, loss of data or loss of profits that results from the use of our software.

7.5 Our software is written and tested on the most recent version of 3rd Party platforms available at the time of release. Intrinsic Group Limited make no assurances of stability of any untested updates that may be released subsequently as all 3rd Party developments are beyond our control. Where an updated driver becomes available this can be downloaded from our website or from within your purchase history. Whilst we make every effort to keep all drivers/modules up to date we disclaim any obligation to do so.

8. Pricing

8.1 We make every effort to maintain the prices shown on our Website, however we reserve the right to discontinue drivers or to amend prices when necessary.

8.2 All prices exclude VAT (where applicable)

8.3 Our pricing originates in £ sterling, we make use of live currency exchange rates to automatically calculate pricing for alternative currencies. The rate used is beyond our control.

9. Support

9.1 We offer comprehensive support for our drivers/modules via an online ticket system. All support queries must be submitted through this ticket system. Any attempt to by-pass this system or to misrepresent priority levels will result in delays.

9.2 Intrinsic Dev offer paid for Remote Support packages for support that falls outside of standard driver queries, including, but not limited to, driver installation, wider system integration/programming and system design.

9.3 All drivers/modules written by Intrinsic Group Limited that require the purchase of a license key are fully supported for as long as they are listed on the Intrinsic Dev site.

9.4 We reserve the right to withdraw licensing and remove download links for a driver/module, thereby discontinuing on-going support at any time and for any reason. This includes, for example, if the equipment for which the driver/module is written is discontinued or substantially modified. The remainder of your rights and obligations pursuant to this license will not be affected should support be discontinued.

10. Other Terms

10.1 This contract is between you and us, no other person has the right to enforce these Terms.

10.2 Each of the paragraphs in these Terms operate separately. If any court or relevant authority deems any of them are unenforceable the remaining paragraphs remain in force and in effect.

10.3 The name Intrinsic Dev and Intrinsic Group, and associated logos are protected under UK copyright laws. The contents of this website, including (but not limited to) downloadable content, imagery and text may not be copied, reproduced, replicated, sold, downloaded or distributed by any means to third parties without the express consent of Intrinsic Group Limited.

10.4 The content of Intrinsic Dev and its Third Party associates are protected by copyright and database laws. You may not extract or use any content (in part or entirety) of the website without express written consent of the owners.

10.5 You must not use this website in any way that causes damage or impairment to the site or company of Intrinsic Group Limited or any other persons. Unlawful and fraudulent activity will be prosecuted.

10.6 The content contained on this website is for information purposes only. Intrinsic Dev (whether written on the website, through the helpdesk, via email or verbally) are not providing any recommendations or endorsements to any Third Party solutions, software or products. The material on this website does not constitute advice and you should not use the information on the website whilst making any decisions.

10.7 We accept no responsibility for the content of websites that are linked to Intrinsic Dev and do not necessarily endorse the material contained within these external websites. These links are provided for convenience only.

11. Contact Details

Intrinsic Dev, The Maltings, Allendale, NE47 9EE, UNITED KINGDOM

Email: info@intrinsicdev.co.uk

VAT Registration Number: 298 2167 63

Intrinsic Dev is a trading name of Intrinsic Group Limited.

Company Reg Number: 09659256