- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
Description:
This driver provides control and feedback for the Inception security panel.
Version History:
Version 1.8: Initial public release.
Inner Range Inception Driver
This driver provides control and feedback for the Inception security panel.
Version History
Version 1.6: Initial public release.
System Requirements & Prerequisites
RTI System Requirements
Integration Designer: 11.4.1 (or newer)
XP FW: 24.10.2 (or newer)
Manufacturer’s Device Requirements
Firmware 6.2.0.7726 (or newer)
Note:
Input/Output/Door names in the driver config must match EXACTLY the names in the Inception settings. These values are CASE-SENSITIVE. Use copy+paste where possible to avoid issues.
Driver Configuration
Connection
Address
- This is the IP address of the Inception.
Username
- Username to login to the panel. This is case-sensitive.
Password
- Password to login to the panel. This is case-sensitive.
Areas
Number of Areas
- Set the number of areas you want to control. Up to 3 areas are available.
Area #
Name
- Specify the case-sensitive name of the area. This must perfectly match the name configured in the panel.
Inputs
Number of Inputs
- Set the number of inputs you want to control. Up to 64 inputs are available.
Input #
Name
- Specify the case-sensitive name of the input. This must perfectly match the name configured in the panel.
Outputs
Number of Outputs
- Set the number of outputs you want to control. Up to 32 outputs are available.
Output #
Name
- Specify the case-sensitive name of the output. This must perfectly match the name configured in the panel.
Doors
Number of Doors
- Set the number of doors you want to control. Up to 4 doors are available.
Door #
Name
- Specify the case-sensitive name of the door. This must perfectly match the name configured in the panel.
Logging
Maximum Entries
- Set the maximum number of entries the log will show.
Security/Access/Hardware/System/Audit
- Checking these boxes allows you to filter which messages should be displayed.
Arming Modes
If you intend to use the perimeter/night arming modes, this must be enabled in the Inception panel settings:
Configuration > Areas > Edit Areas > Inputs
Make sure the 'Multi-Mode Arming' checkbox is ticked.
Support Contact
Remote Technologies Inc.
Phone Number: +1 952-253-3100
Email: support@rticontrol.com