- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
- Voice Control
Description:
This driver is for the FX Luminaire Luxor series lighting controllers. It was developed using a LUX-150M.
FX Luminaire Luxor Controllers
Tested and developed on a LUX-150M.
Release History:
1.0: Initial Release of the driver.
Configuration:
• IP Address: This is the assigned IP address which can be found on the controller under “Setup > LAN”.
• Group Name: This is the Group Name you want to use while programming in ID. This is NOT the name that will appear on any panels using the “Group x Name” variable.
This driver does not allow for configuration to be made in the RTI system, it is expecting that setup has been done with the Luxor controller or Luxor app.
Included Variables:
Basic Controller state information
Number of Groups currently on
Color List – This includes all programmed Color and ColorWheel settings from the controller
Theme information as assigned on the controller or app
Name
Index on the controller
On/Off
List for easy toggle On/Off commands
Group information as assigned on the controller or app
Name
Group Number on the controller
On/Off
Intensity
Color
If the group is currently focused for color changes
Driver Commands:
• All lights On/Off
• Flash Serial Number mode for help with programming groups
• Color List selection for assigning colors to the focused groups
• Theme On/Off – Discrete and from a list
• Group Set Intensity – Essentially the On/Off function but with a variable set point best used on faders
• Focus a group – This sets the drivers focused group so that you can assign any Color or ColorWheel presets to that group from the Color List
• Set Color/Colorwheel – Discrete and from a list using Focused Group
Setting a Color using the Color List:
To use the color list for assigning group colors you must first use the “Set Focus” command and then select any Color from the Color List, if the Group you have selected does not accept colors nothing will happen.
Using the Theme List:
The theme list allows for easy toggling of Themes. This list will dynamically update itself to put
“> <” around whatever themes are currently turned on. It will also allow you to turn on as many themes as you would like, so it is important that your system is designed with this in mind.
Button Tags:
• Color List
• Theme List
• Focus
• Themes are all tagged to “Preset X”
The rest of the tags follow the standard tags for Lighting controls.