Ezlo | Z-Wave & Zigbee | Ezlo Plus Hub | IP | Version 1.2

Introduction & Manufacturer Profile

Ezlo was founded to disrupt the smart home market as it became stagnant with siloed smart devices that didn’t play nice together. Ezlo Smart Hubs were built to deliver simplicity and interoperability with thousands of Z-Wave devices.

Version History

Version 1.0

Initial Release

Version 1.1

Added Zigbee device support

Added commands, variables, and events for Armed (supported sensors only)

Added variables and events for Reachable

Added doorbell ringing and motion events and variables.

Fixed login issue with capitals in username

Fixed issues w/ sensors and variables at runtime

Version 1.2

Added Scene support

Added RGB Light Support

Fixed issue with some Unicode characters not being displayed correctly in device names.

Fixed issue when an unknown device appears in the Ezlo configuration.

System Requirements & Prerequisites

RTI System Requirements

Integration Designer: 11.5 or later.

XP FW: 23.5.11 or later.

Manufacturer Requirements

Works with Ezlo Plus. Should also work with Ezlo Secure and Ezlo Atom according to Ezlo.

Model FW Version: 2.0.38.2193.2 or later.

Driver Configuration

Add driver to Global.

Once added fill in the driver config info with your Username, Password and the Serial of the Hub

The Connect via Cloud option will route all commands via the cloud. With this unchecked all commands will be sent locally to the hub.

Even with Connect via cloud unchecked, the driver still needs to perform some authorization with the cloud server, so internet access is essential.

Press Get Config from Ezlo Hub

Once the Config has been retrieved go to Add new Workspace Item

Select Drivers

Under RTI Ezlo You will see all the devices associated with the hub, Add the ones you wish to use.

Driver

Template Page Names:

Main Hub: Lighting

HVAC Devices: Climate

Sensor Devices: Sensors

Doorbell Devices: Intercom

Door Lock Devices: Door Lock

Switch Devices: Switch Outlet

Light Devices: Lighting

Manufacturer

Ezlo Hub must have internet access.

All devices need to be added to the hub.

The driver will fail to get the config from the Hub if no devices have been paired to it.

Ensure the Serial number is correct. The driver will match the serial number you put in the driver config to the hub reported by Ezlo. If the serial doesn’t match the driver will not be able to connect.

Driver Features

This driver will control and give feedback for HVAC, Sensors, Doorbells, Lights, Switches and Door Locks.

Scenes are added under the main hub source.

Tags

This driver uses the following non-standard tags. For default tags, reference the master tag list.

All Devices

Tag NameF/VFunction UsageVariable Usage

ReachableVShows Reachable State

Sensors

Tag NameF/VFunction UsageVariable Usage

ArmedFVToggles the Sensors Armed StateShows Armed State & Goes True when Armed
Door Locks

Tag NameF/VFunction UsageVariable Usage

Lock StateFVToggles Lock StateShows Lock State
LockFVLocks the Door LockGoes True when Locked
UnlockFVUnlocks the Door LockGoes True When Unlocked

Switch

Tag NameF/VFunction UsageVariable Usage

Outlet StateFVToggles Switch StateShows Switch State
Outlet OnFVTurns the Switch OnGoes True when On
Outlet OffFVTurns the Switch OffGoes True When Off

Scenes

Tag NameF/VFunction UsageVariable Usage

Scene (Number)FVSelects SceneShow True while Scene is Running
Scene (Number)Text TagScene Name

HVAC/Sensors

Due to the multitude of HVAC and Sensor devices supported by Ezlo, It is impossible to list all the tags here as they will be different for each device.

But they should be the same as the Command/Variable Name

Events

Events will be created for each device.

Again, due to the different capabilities of each device, it is impossible to list all the events here.

All Devices

Event NameEvent Usage

ReachableTriggers if device becomes Reachable
Not ReachableTriggers if device becomes Unreachable

Sensors

Event NameEvent Usage

ArmedTriggers when device is Armed
DisarmedTriggers when device is Disarmed

Door Locks

Event NameEvent Usage

LockedTriggers when device is Locked
UnlockedTriggers when device is Unlocked

Lights

Event NameEvent Usage

Power OnTriggers when device is Powered On
Power OffTriggers when device is Powered Off

Switches

Event NameEvent Usage

Power OnTriggers when device is Powered On
Power OffTriggers when device is Powered Off

Doorbells

Event NameEvent Usage

RingingTriggers when Doorbell Rings
Stopped RingingTriggers when Doorbell stops ringing
Motion DetectedTriggers when Motion is detected
Motion StoppedTriggers when Motion stops

System Testing

Integration Designer 11.5:

XP Processor Model: XP-8v

XP Processor Firmware: 23.5.11

Device Model(s): Ezlo Plus

Device FW: 2.0.38.2193.2

Support Contact

RTI Control

+ 1.952.253.3137

support@rticontrol.com