Ecler Audio Matrix's

This driver is for controlling Ecler MIMO88SG and was tested with the Ecler MIMO88SG.

Revision History

1.0 Initial release of the driver.

1.1 Added Integer Variables, and fixed Set Commands to use integers instead of strings

Connection Type

Serial (RS-232)

Serial Port - Assign appropriate port number.

Network (UDP)

UDP Address - Enter the IP address of the Ecler Matrix. It is recommended to assign a static IP address either via the Ecler web page or MAC reservation in the network router.

Output Count

Assign number of outputs to be used. This will determine what functions and variables are made available.

Input Count

The count names are specific to the model selected. Assign counts to meet integration needs for current system.

Input Naming

Assign appropriate names to each input if desired. This will overwrite the names assigned in Ecler web page.

Output Naming

Assign appropriate names to each output if desired. This will overwrite the names assigned in Ecler web page.

Driver Commands

There are commands available for Volume and Mute.

Driver Variables

There are variables available for Volume and Mute.