Driver Type
Categories
- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Networking
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
Driver Type
Categories
- Recent Updates
- Access Control
- Amplifier
- A/V Receiver
- Climate and Pool Control
- Disc Player / Changer
- Display
- DSP
- DVR
- Irrigation / Sprinklers
- Lighting Control
- Matrix Switch
- Media Server and Player
- Multi-Room A/V
- Networking
- Power and Rack Management
- Security
- Surveillance
- Teleconferencing
- Training
- Tuner
- Utility
- Video Projector
Provides control for DALCNET DMG02-1248(c) 2024 D2A
This driver integrates functions and variables in accordance with the Dalcnet protocol.
Version History:
v1.0 - Initial release (November 2024)
v1.01 - Adding raw commands
v1.1 - Adding tcp status and informations
Contact:
Benoit QUELLEC / D2A Digital To Analog / bquellec@d2a.mc
DALCNET DMG02-1248
(c) 2024 D2A
This driver integrate the following functions and variables in accordance with the Dalcnet protocol.
Revision History
1.0 Initial release (November 2024)
1.01 Adding raw commands
1.1 Adding tcp status and informations
Connection Settings
Network (Telnet) – TCP IP
Network Settings
IP Address - Enter the IP address used by Yamaha RM-CG microphone.
The device should be set to a static IP or be included in the MAC reservation table of the network router.
IP Port - Enter the IP Port used for communications with the device. The default is port 23.
Device Settings~:
The device needs to have the telnet communication enabled in the web interface.
The minimum settable interval for sending response strings is defined as "min scan time”.
In the event that no changes are detected, the interval with which the string is periodically sent is defined with the value set to"max scan time". The zero value disables periodic transmission.
After modifying the settings, click on the “APPLY” button at the top right, otherwise the changes will be lost.
With the “CLEAR” button the changes are cancelled.
The status of 512 light intensity levels or even fewer levels can be sent in a single ASCII string.
Integrated functions and variables:
# Channels Level:
On/Off (Commands and Status)
Toggle / On / Off
Increment / Decrement (Commands Only)
Intensity (Commands and Status)
# Dali DT8~:
Color intensity (Commands and Status)
# Scenes
Save and Recall general device scenes (Commands Only)