Driver Details

New

Blustream MV41

By: RTI
Updated: Sept. 27, 2024
Version: 1.02

Description

This driver allows IP/RS232 control over the Blustream MV41 device.

Version History:

Version 1.0: Initial Release
Version 1.01: Adds input naming for window sources. Adds preset commands.
Version 1.02: Fixes issue with stack not restarting after a missed command.

 

Blustream MV41

Blustream MV41 | IP / RS-232 | Version 1.02

Introduction

This driver was written and tested using a Blustream MV41 running firmware version v1.30 and GUI v1.30.

Version History

Version 1.0: Initial Release

Version 1.01: Adds input naming for window sources. Adds preset commands.

Version 1.02: Fixes issue with stack not restarting after a missed command.

Driver Features

This driver allows control over the Blustream MV41 device.

System Requirements & Prerequisites

RTI System Requirements

Integration Designer: 11.9

XP FW: 24.3.29

ManufacturerDevice Requirements

Blustream MV41

Firmware Version: 1.30

Driver Configuration

Control Type:

IP Control

– IP

The IP Address of the device intended to connect for control. The port defaults to 23(the default for telnet connections)

– Port

The port for communicating with the device. 23 by default.

Serial Control

– Serial Port

The RS232 port the device is connected to on the processor. Port 1, Port 2, Port 3.

Driver Notes

There is a sample file included which shows one way of utilizing this driver which will mimic the Web GUIfunctionality.

Preset names only support one word currently. If you name them something with a space, only the first word will be pulled into the variable.