Atlona Technologies

This driver is for the Atlona 6 Input switcher and scaler with HDBaseT and mirrored HDMI Output connected via RS-232 or Ethernet. Version 1.0 was tested using an AT-UHD-CLSO-612 with a firmware version of 1.0.60 and OSD Revision 1.1.0

Revision History

1.0 The Initial release of the driver

TCP Connection

The TCP connection on the Atlona switcher should be connected to the Network. It is recommended the matrix switch be set to a static IP and the port be assigned. Please refer to the Atlona documentation on how to set up the IP and port.

The driver uses port 23 as a default, but this may be changed if needed.

RS-232 Connection

The RS-232 connection on the Atlona switcher should be connected with a straight through cable to the XP serial adapter.

The Atlona switcher defaults to a baud rate of 115200, but may be adjusted to 2400, 4800, 9600, 19200, 38400, 57600, or 115200. Please refer to the Atlona documentation on how to change the matrix switch RS-232 settings.

I/O Count

Select the appropriate input count for the switch in use. Selections are 2, 4, or 6.

Output and Input Naming

Enter the names preferred for use in the driver commands, variables, and events. All visible fields must be named.

Driver Notes

- send RAW string available