madVR Envy RTI Driver Instructions

This RTI driver provides IP control of madVR Envy video processors (Envy Pro / Envy Extreme models). It allows for full command transmission, feedback parsing, and diagnostics integration over TCP/IP.

Version History

Version 1.0 – Initial Release

Version 1.1 – System Events added for incoming signal aspect ratio

Version 1.2 – Driver Info updated

Version 1.21 - Removed Standby option - seems that there is something amiss with the MadVR API that stops the unit from waking up after sending the Standby Command.

Features

Power On / Off control via Wake-on-LAN and TCP commands

Full Aspect Ratio switching with feedback

Input / Source name and resolution reporting

Menu navigation and direct menu opening support

Real-time feedback for video resolution, framerate, format

Diagnostics-friendly variables for live status monitoring

Connection Information

Protocol: TCP/IP

Port: 44077 (default)

Wake-on-LAN MAC address must be configured in driver settings

Driver Configuration

Configure the following settings in Integration Designer:

IP Address – IP of the madVR Envy processor

Port Number – TCP control port (default: 44077)

MAC Address – For Wake-on-LAN (format: 00:11:22:33:44:55)

Supported Commands

Power On (Wake-on-LAN)

Power Off

Restart / Standby

SetAspectRatioMode (Auto, Hold, 4:3, 16:9, 2.35:1, etc.)

Open/Close Menus (Info, Settings, Config, Profiles, Patterns)

Remote key presses (Arrow, OK, Menu, Settings, etc.)

Device Setup for Wake On Lan

Make sure that the MadVR power settings are set to "Go Nuts"
Settings (under power on remote) > Scroll to "Power & Cooling Configuration" > "Power Consumption Pref" and then "Go Nuts" press teh Green button to save as Base if not already

Feedback & Variables

The following variables update in real-time based on Envy responses:

PowerState – true/false

IncomingResolution – e.g., 3840x2160

IncomingFramerate – e.g., 24Hz

IncomingFormat – e.g., HDR10

IncomingName – e.g., PC

AspectRatio – e.g., 2.35

AspectRatioMode – e.g., 2.35:1

AspectRatioName – e.g., Scope

MaskingRatio – e.g., 3840:1594

Driver Events
V1.0
Power On
Power Off
Input Change
Profile Change
Config Menu Open
Config Menu Closed

V1.1
System Events added for incoming signal aspect ratio

Diagnostics

All variables appear in XP Diagnostics with associated button tags. Menu state, resolution, and aspect settings are visible under categories like 'Power', 'Menus', 'Incoming Data', and 'Scaling Data'.

Notes

Envy must be on the same local network as the processor.

Some feedback may require active video signal.

Ensure TCP port is not blocked by firewalls.

UI designed and provided by BlackMan custom – This was designed for the RTI Spectre templates http://www.blackmancustoms.com/spectre/, but I could probably create an Aleera version pretty quickly if needed.

You can access the file here: https://blackmancustoms.com/downloads.htm

Enjoy.

Tech Support is handled by Habitech Ltd

Please have the subject of the email titled - RTI Driver - <driver name>
For example, RTI Driver - MadVR to RTI@Habitech.co.uk